Zone Offroad 6 Suspension System Lift Kit for 03-07 Dodge Ram 2500 3500 HD
This is a brand new Zone Offroad 6 Suspension System. We are an Authorized Dealer of Zone Offroad and carry the full line of products. 03-'07 Dodge Ram 2500/3500. Zone Offroad 6 Suspension System. Unique upper and lower control arm relocation bracket design.
No cutting of the frame required. High performance at a low price.
The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4 steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required.
Stock alignment adjustability is retained. In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.
Front Lift Method: Coil Springs Rear Lift Height: 4? Rear Lift Method: Block Kit Install Time Hrs: 6-8 Difficulty Level 1-5: 3 Wheel Size: 17 X 9 Back Spacing: 4.5-5? Max Tire Size: 37 X 12.50 Important Notes! 2-piece rear driveshaft requires carrier bearing drop kit D5505 Will not fit dually applications Rear axle diameter will be 3.5" or 4", measure before ordering Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary If driveline vibration is present, some 6 kits may require the transfer case indexing kit (D5805).
See installation instructions (step 17) for fitment details. Will work with Power Wagon models with the addition of sway bar link kit D5301. Power Wagon models came factory with a 2" taller ride height so net lift gain will be 4" over stock.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring Vehicle Type/Specs Diesel Engine (D26, D27) Gas Engine (D28, D29) Vehicle Type/Specs 4" Rear Axle Diameter (Kit D27, D29) 3-1/2" Rear Axle Diameter (Kit D26, D28). To make your shopping experience as simple and easy as possible, please refer to our company policies shown below. Tracking numbers are updated manually, so please allow enough time for your information to be entered after your order has been placed. AZ Offroad & Performance, Inc.
& will do everything possible to ensure the customer's satisfaction. We are not responsible for install mistakes. The RA # must be on the outside of each package with the RA # in a visible area.
Any package without the RA # will be refused. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Lift Kits & Parts". The seller is "azoffroadperformance" and is located in this country: US. This item can be shipped worldwide.- Lift Height: 6\
- Interchange Part Number: Components Hardware
- Manufacturer Part Number: D27N
- Part Type: Suspension Lift Kit
- Included Hardware: Mounting Hardware
- Placement on Vehicle: Left, Right, Front, Rear
- Other Part Number: Lift Suspension Kit Level Steering
- Brand: Zone Offroad
- Warranty: Yes